Solidair Audio Aluminium Speaker isolation suspension bridge – 300mm
The aluminium speaker isolation suspension bridge, to lift your speakers, floating them in the air and isolating them from the floor.
The sound is kept out of the floor, it lifts the whole soundscape higher in the room, gives it more air and a richness and warmth that you don’t get when the floor joins in with the performance. The smallest details become clear and staging is so precise, it is a delight for your ears. They give your speakers an instantly audible and substantial upgrade.
Your downstairs neighbours will be happy too. In tests over half the power transmitted though the floor was cut out. The unpleasant bass thump was eliminated.
The aluminium speaker isolation suspension bridge is a more economical option than original stainless steel and brass option. They work really well for most typical floor standing speakers. These 300mm long bridges are designed for speakers from 8Kg to 40Kg in weight. The speaker suspension bridges here will take speakers up to 300mm wide. They come in sets of four (two for each speaker). Other widths can be easily catered for, though we would need a bit of notice to make them to order, typically about a week. A set are shown in the image section made for a pair Aspara horn speakers, a 8″ wide speaker, weighing in at 30Kg.
The main bar is cut from 6mm Aluminium, so it is stiff and robust. The magnets are neodymium with a nickel plating and have proved very reliable, showing no sign of deterioration after several years in service.
Please be aware that the magnets are powerful and that extreme care should be taken if you decide to disassemble the bridge for any reason. The speaker cables should also be kept at least a few inches from the bridge magnets, (though we have never noticed any sound difference, even when the wire is very close).